We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670220000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6431 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1670220000, make contact with FAMAGA, the world's key supplier of mechanized equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of outputs and private attention to each buyer. We praise everyone, who worked with us - hence, our regular consumers get the most desirable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Jamaica, Malaysia, Eritrea, Belgium, Monaco, Myanmar, Bahamas, Netherlands, Dominican Republic, Zimbabwe, Russia, Macedonia, Burundi, Dominica, Georgia, Philippines, Algeria, Antigua and Barbuda, Nicaragua, Yemen, United States, Syria, Morocco, Lithuania, China, Laos, United Arab Emirates, Samoa, Thailand, Poland, Mauritius, Uganda, Guatemala, Burkina Faso, Angola, East Timor, Brunei, Latvia, Sierra Leone, South Korea, Ireland, Mexico, Qatar. A well-shaped logistics system and a partnership network guide us to dispatch our goods anywhere in the globe immediately without disreputing product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as to stay on the top.
To request or book, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |