We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R404051010
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R404051010, catch up with FAMAGA, the world's chief producer of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and special attention to each consumer. We appreciate everyone, who collaborated with us - thus, our regular purchasers bring in the most beneficial purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Mozambique, Mexico, Finland, Oman, Botswana, Macedonia, Slovenia, Samoa, Switzerland, Dominican Republic, North Korea, United Arab Emirates, Liberia, Iran, Eswatini, Hungary, Poland, Seychelles, Rwanda, Ireland, Turkmenistan, Malaysia, Malawi, Djibouti, Norway, Algeria, Morocco, Sudan, Indonesia, Burundi, Haiti, Jamaica, Lithuania, Albania, El Salvador, Cameroon, Burkina Faso, Mali, India, Mauritania, Cyprus, Tunisia, Togo, Afghanistan. A well-built logistics link and a partnership network help us to send our goods anywhere in the world on-time without disreputing product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |