We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422715101
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422715101, call FAMAGA, the world's chief producer of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and private attention to each customer. We value everyone, who liased with us - so, our regular buyers accept the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Cuba, Japan, Madagascar, South Sudan, Bhutan, Afghanistan, Romania, Lebanon, Eritrea, Bolivia, Niger, Uzbekistan, Luxembourg, Nicaragua, Benin, Philippines, Mauritania, Belarus, Qatar, Brazil, Chad, Jamaica, Norway, Sierra Leone, Mozambique, Monaco, El Salvador, Samoa, Rwanda, Peru, Poland, Togo, Iceland, Suriname, Montenegro, Tajikistan, Kyrgyzstan, South Korea, Syria, Egypt, Namibia, Comoros, Andorra. A well-built logistics chains and a partnership network let us to ship our products anywhere in the planet immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as keep on top of it.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |