We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340611
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822340611, catch up with FAMAGA, the world's main provider of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each purchaser. We respect everyone, who engaged with us - hence, our regular consumers accept the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, China, Bahamas, Togo, Azerbaijan, Seychelles, Sudan, Nigeria, Indonesia, Serbia, Sweden, Ireland, Costa Rica, Haiti, Mauritania, Bangladesh, Kiribati, United States, Norway, Kyrgyzstan, Bolivia, Japan, Denmark, Guyana, Cape Verde, Qatar, Samoa, Nepal, Bosnia and Herzegovina, Yemen, Liechtenstein, Comoros, Bulgaria, Switzerland, Croatia, Albania, El Salvador, Tajikistan, Armenia, Mauritius, Uruguay, Philippines, Chile. A well-elaborated logistics network and a partnership network cheer us to dispatch our items anywhere in the world quickly without discrediting product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |