We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300334
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1650 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821300334, get in touch with FAMAGA, the world's principle company of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of spare parts and particular attention to each orderer. We value everyone, who conspired with us - therefore, our regular purchasers receive the most attractive purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the earth Germany, United Kingdom, Barbados, Fiji, Jordan, Palestine, Gambia, Canada, Azerbaijan, Oman, Belgium, Malawi, Syria, Mali, Zambia, United States, Panama, Kyrgyzstan, Belize, Norway, Lithuania, Saudi Arabia, Croatia, Liechtenstein, Laos, Comoros, Brazil, Uruguay, Dominica, Slovakia, Czech Republic, North Korea, El Salvador, India, Equatorial Guinea, Sudan, Ukraine, Central African Republic, Iran, Antigua and Barbuda, Niger. A well-built logistics series and a partnership network guide us to ship our elements anywhere in the planet with no delay without disreputing product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been provided, and this number is amounting every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or book, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 2 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1650 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 25 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |