We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340602
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822340602, connect FAMAGA, the world's influential provider of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and special attention to each buyer. We esteem everyone, who engaged with us - therefore, our regular purchasers pick up the most favorable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Lesotho, The Gambia, North Korea, Bhutan, Ecuador, Netherlands, Antigua and Barbuda, Japan, Grenada, Uzbekistan, Zimbabwe, Niger, Argentina, Belarus, Togo, Kazakhstan, Cameroon, India, Moldova, Turkmenistan, United Arab Emirates, Jordan, Namibia, Indonesia, Israel, Equatorial Guinea, Haiti, Kyrgyzstan, Ghana, Tanzania, Philippines, Laos, El Salvador, Bosnia and Herzegovina, Nigeria, Algeria, Uganda, Tonga, Rwanda. A well-built logistics link and a partnership network allow us to send our units anywhere in the planet as soon as possible without disreputing product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |