We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822121007
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822121007, communicate with FAMAGA, the world's chief company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of products and personalseparate attention to each orderer. We value everyone, who engaged with us - thus, our regular consumers accept the most attractive purchase terms and discounts on the factory-made equipment market. Today, there are more than 3500 such consumers, and we constantly sign new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Cyprus, Bahrain, North Korea, Andorra, Italy, Vietnam, Papua New Guinea, Tanzania, Jordan, Bahamas, Mauritius, Namibia, Bangladesh, Egypt, Belgium, Singapore, Nicaragua, Ecuador, South Sudan, The Bahamas, Rwanda, Nepal, Eritrea, Bosnia and Herzegovina, Ireland, Estonia, Kyrgyzstan, Seychelles, Fiji, Costa Rica, Kiribati, Qatar, Guatemala, Cape Verde, Hungary, Bolivia, Serbia, Swaziland, Madagascar, Georgia, Latvia, Comoros, Dominica, Finland. A well-elaborated logistics link and a partnership network assist us to deliver our items anywhere in the planet on-time without discrediting product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are glad that users choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, phone us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |