We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472D02831
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Actuating control | single solenoid |
Return type | With spring/air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | EN 61076-2-101 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472D02831, communicate with FAMAGA, the world's chief vendor of streamlined equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of outcomes and special attention to each consumer. We cherish everyone, who liased with us - thus, our regular clients procure the most convenient purchase forms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Denmark, Spain, Malaysia, Cyprus, Portugal, Norway, Palestine, Vietnam, The Gambia, Myanmar, Equatorial Guinea, Benin, East Timor, Slovakia, Colombia, Grenada, Liechtenstein, Russia, Ecuador, Uzbekistan, Poland, Australia, Saudi Arabia, Malawi, Brazil, Nigeria, Mozambique, Libya, Azerbaijan, Algeria, China, Andorra, Niger, Armenia, Burkina Faso, Ukraine, Mongolia, Thailand, Montenegro, Tunisia, Ghana, Paraguay, Uganda, Lithuania. A advanced logistics bond and a partnership network guide us to conduct our products anywhere in the planet promptly without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | EN 61076-2-101 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Protective circuit | TVS diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,12 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |