We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495303
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822495303, catch up with FAMAGA, the world's chief supplier of streamlined equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each customer. We cherish everyone, who conspired with us - thus, our regular buyers accept the most flexible purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Kiribati, Myanmar, Bolivia, Djibouti, Burma, Nigeria, Malawi, Estonia, Cyprus, Grenada, Burkina Faso, Belgium, Libya, Netherlands, Turkmenistan, Tunisia, Croatia, Malta, Jordan, Madagascar, Equatorial Guinea, Liechtenstein, Kyrgyzstan, Mali, Indonesia, Senegal, Cameroon, Azerbaijan, Finland, Macedonia, Czech Republic, Greece, Afghanistan, Mongolia, Argentina, Bangladesh, New Zealand, Eswatini, Australia, Turkey, Bosnia and Herzegovina, Niger. A advanced logistics series and a partnership network allow us to send our items anywhere in the globe immediately without disreputing product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |