We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670210000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6431 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1670210000, reach FAMAGA, the world's the best company of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of items and private attention to each client. We admire everyone, who collaborated with us - so, our regular consumers receive the most acceptable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Côte d\'Ivoire, Eritrea, Burundi, Turkey, Nicaragua, Andorra, Russia, Azerbaijan, Cameroon, Australia, Kiribati, Laos, Sweden, Equatorial Guinea, South Korea, Chad, Ghana, Japan, Grenada, Niger, Bulgaria, Brazil, Algeria, Namibia, Mozambique, India, Rwanda, Zambia, Swaziland, Libya, South Sudan, Eswatini, Mongolia, Czech Republic, Armenia, Pakistan, Iraq, Dominica, Denmark, Morocco, United Arab Emirates, New Zealand, Kuwait, Tunisia, Belarus. A well-shaped logistics network and a partnership network allow us to dispatch our products anywhere in the world with no delay without disreputing product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |