We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495302
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822495302, get in touch with FAMAGA, the world's principle provider of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each orderer. We esteem everyone, who liased with us - therefore, our regular purchasers bring in the most favorable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Guinea-Bissau, Liberia, Georgia, Nepal, Ecuador, United Arab Emirates, Jordan, El Salvador, Malaysia, Sweden, Estonia, Samoa, Bangladesh, Zimbabwe, Czech Republic, Brunei, Uzbekistan, Netherlands, Belarus, Swaziland, Mauritania, Romania, Tajikistan, Ireland, Paraguay, Luxembourg, Seychelles, Pakistan, Australia, Afghanistan, Burundi, The Bahamas, Switzerland, Finland, Mexico, Serbia, Argentina, South Sudan, Sudan, Vietnam, Central African Republic, Kenya, Dominica, New Zealand, Croatia, Rwanda. A well-elaborated logistics link and a partnership network allow us to ship our items anywhere in the world on-time without undermining product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or book, get in touch with us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |