We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020778
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412020778, connect FAMAGA, the world's chief retailer of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each orderer. We admire everyone, who liased with us - thus, our regular clients pick up the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4500 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Malaysia, Zambia, Romania, Belarus, Guyana, Moldova, Afghanistan, Slovakia, Guatemala, Mozambique, Slovenia, Antigua and Barbuda, South Sudan, Nepal, Fiji, East Timor, Switzerland, Japan, Greece, Philippines, Saudi Arabia, Luxembourg, Nigeria, Tajikistan, El Salvador, Morocco, Belize, Mauritius, Vietnam, Jamaica, Niger, Samoa, Madagascar, Angola, Syria, North Korea, Suriname, Iraq, United States, Latvia, Albania, Montenegro, Finland, Peru, Poland, Qatar. A well-developed logistics network and a partnership network cheer us to conduct our goods anywhere in the globe immediately without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this quantity is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Guide bushing | Steel |