We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422103585
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 180 l/min |
Compressed air connection input | Ø 4 |
Compressed air connection output | Ø 4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422103585, call FAMAGA, the world's influential supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of products and personalseparate attention to each purchaser. We value everyone, who joined with us - so, our regular buyers procure the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Switzerland, Moldova, Comoros, Israel, Swaziland, Czech Republic, Poland, Madagascar, Romania, Andorra, Jamaica, East Timor, Georgia, Slovenia, Estonia, South Sudan, Niger, United Arab Emirates, Liechtenstein, Pakistan, Greece, Guyana, Croatia, Mauritius, Malta, Monaco, Cape Verde, Panama, Kyrgyzstan, Guatemala, Nepal, Malaysia, Tajikistan, Norway, Costa Rica, Angola, Burkina Faso, Kuwait, United States, Australia, Ireland, Benin, Latvia, Bolivia. A well-developed logistics network and a partnership network allow us to send our elements anywhere in the world quickly without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as to stay on the top.
To consult or book, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 7 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
Protective circuit | Z-diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 15 ms |
Generic emission standard in accordance with | EN 61000-6-4:2002 |
Generic immunity standard in accordance with | IEC 61000-6-2:2005 |
mounting screws | M3 |
Mounting screw tightening torque | 0,5 Nm |
Weight | 0,064 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane |