We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480631340
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480631340, contact FAMAGA, the world's principle distributor of mechanized equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each client. We cherish everyone, who conspired with us - hence, our regular customers accept the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4500 such customers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Seychelles, San Marino, Bahamas, Bangladesh, Dominican Republic, Bosnia and Herzegovina, Romania, Cuba, Congo, Oman, Hungary, Ireland, Jordan, United States, Indonesia, Finland, Equatorial Guinea, Poland, Laos, Suriname, New Zealand, Egypt, Niger, Madagascar, South Korea, Guyana, Mauritius, Kiribati, Mauritania, Serbia, Czech Republic, Estonia, Botswana, Tajikistan, Vietnam, Syria, Togo, East Timor, Dominica, Cyprus, Comoros. A well-built logistics system and a partnership network cheer us to deliver our goods anywhere in the globe on-time without damaging product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Trunnion mounting | Nodular graphite iron |
Tie-rods | Stainless steel |