We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495101
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822495101, communicate with FAMAGA, the world's principle vendor of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each orderer. We admire everyone, who cooperated with us - thus, our regular consumers receive the most desirable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4500 such clients, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Uruguay, Grenada, Uzbekistan, France, Cuba, Colombia, Malawi, Gambia, Monaco, Burundi, Honduras, Swaziland, Ghana, Togo, Kazakhstan, Algeria, Kyrgyzstan, Saudi Arabia, The Bahamas, Turkmenistan, Australia, South Korea, Liberia, Bulgaria, Indonesia, Equatorial Guinea, Iran, Antigua and Barbuda, Ireland, Senegal, Hungary, Suriname, Slovakia, Paraguay, Eswatini, Croatia, Greece, Philippines, North Korea, Argentina, Andorra, Malaysia, Laos, Central African Republic. A well-developed logistics system and a partnership network allow us to dispatch our items anywhere in the globe quickly without discrediting product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |