We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020714
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412020714, make contact with FAMAGA, the world's primary vendor of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each client. We admire everyone, who joined with us - therefore, our regular purchasers accept the most desirable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Côte d\'Ivoire, Belize, Malta, Netherlands, Guyana, Burundi, Cameroon, Jamaica, Tanzania, Nicaragua, Haiti, Uganda, Pakistan, Central African Republic, Canada, Chad, Thailand, Jordan, North Korea, Bosnia and Herzegovina, Yemen, Tunisia, Sudan, East Timor, Russia, Sierra Leone, Kenya, Mexico, Equatorial Guinea, Bulgaria, Azerbaijan, Ghana, New Zealand, Mongolia, China, Rwanda, Djibouti, India, Libya, Nigeria, Cape Verde, Chile, Philippines. A advanced logistics system and a partnership network help us to ship our units anywhere in the world with no delay without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this amount is amounting every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |