We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334462
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822334462, contact FAMAGA, the world's foremost distributor of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each consumer. We understand everyone, who conspired with us - thus, our regular purchasers procure the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Barbados, Belize, North Korea, Thailand, Angola, Algeria, Laos, Lebanon, Djibouti, Lithuania, Panama, Gambia, Saudi Arabia, Madagascar, Liberia, Liechtenstein, Uganda, Qatar, Ukraine, Guyana, Guatemala, Hungary, Armenia, Rwanda, Kyrgyzstan, Serbia, Antigua and Barbuda, Zambia, Norway, Seychelles, Bosnia and Herzegovina, Sudan, India, Tanzania, Bulgaria, Namibia, Poland, Andorra, Mali, Tonga, Eswatini, Belarus, Macedonia, Slovakia, Malta. A well-shaped logistics bond and a partnership network let us to conduct our goods anywhere in the planet immediately without disreputing product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |