Aventics (brand of Emerson) R422103580
  Aventics (brand of Emerson) R422103580

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R422103580 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R422103580

Description

Switching principle 2x3/2
Version Spool valve, positive overlapping
Housing Polyoxymethylene
Sealing material Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane
Protection class IP50
Number of wires 2-pin
Port size Industrial plug connector
Type Plug
Nominal flow Qn 310 l/min
Compressed air connection input Ø 6
Compressed air connection output Ø 6
DC operating voltage 24 V
Activation Electrically

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R422103580

If you are inspecting Aventics (brand of Emerson) R422103580, connect FAMAGA, the world's top company of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each user. We value everyone, who engaged with us - so, our regular customers bring in the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe . A well-elaborated logistics series and a partnership network cheer us to send our products anywhere in the globe promptly without disreputing product quality.

A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of factory-made equipment.

All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.

To request or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features R422103580

Version Spool valve, positive overlapping
Activation Electrically
Pilot Internal
Sealing principle Soft sealing
Working pressure min./max. 3 ... 7 bar
Ambient temperature min./max. -10 ... 50 °C
Medium temperature min./max. -10 ... 50 °C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 ... 5 mg/m³
Nominal flow Qn See table
Protection class acc. to DIN EN 61140 Electrically Class III
Protection class with connection IP50
Protective circuit Z-diode
LED status display Yellow
Duty cycle 100 %
Typ. switch-on time 12 ms
Typ. switch-off time 15 ms
Generic emission standard in accordance with EN 61000-6-4:2002
Generic immunity standard in accordance with IEC 61000-6-2:2005
mounting screws M3
Mounting screw tightening torque 0,5 Nm
Weight 0,064 kg
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves.
Material
Housing Polyoxymethylene
Seals Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane