We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011176
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant I, with 2 x 3/2-directional valve |
Version | 2x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412011176, get in touch with FAMAGA, the world's chief company of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of products and particular attention to each orderer. We respect everyone, who liased with us - so, our regular consumers pick up the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Thailand, Ghana, Brunei, Zimbabwe, Bosnia and Herzegovina, Netherlands, Colombia, Bhutan, Belgium, Australia, Swaziland, Mongolia, Bangladesh, Burkina Faso, Malawi, East Timor, Guyana, Peru, Japan, Cyprus, Fiji, United States, Guatemala, Georgia, Kiribati, Russia, United Arab Emirates, Czech Republic, Uzbekistan, Haiti, Djibouti, Kazakhstan, Sweden, South Korea, Senegal, Estonia, China, Seychelles, Serbia, Iran, Egypt, Mauritania, Morocco, Samoa. A well-built logistics bond and a partnership network allow us to conduct our items anywhere in the earth immediately without disreputing product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as to stay on the top.
To request or order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |