We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627383
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480627383, communicate with FAMAGA, the world's major supplier of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each customer. We cherish everyone, who liased with us - hence, our regular customers pick up the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Australia, Bulgaria, Swaziland, San Marino, Italy, Monaco, Canada, Malawi, Burma, Uruguay, Nepal, Zambia, Equatorial Guinea, Poland, Chad, Costa Rica, Fiji, Finland, The Bahamas, United Arab Emirates, Russia, Guatemala, Mauritania, Philippines, Armenia, Angola, Switzerland, Paraguay, Liechtenstein, Tajikistan, Cape Verde, Montenegro, Syria, Mozambique, Thailand, Serbia, Estonia, Mexico, Albania, New Zealand, Belarus, Burkina Faso, Sweden, Botswana. A well-elaborated logistics chains and a partnership network guide us to send our goods anywhere in the world immediately without compromising product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as stay in control.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |