We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822121001
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822121001, communicate with FAMAGA, the world's top producer of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of products and personalseparate attention to each consumer. We cherish everyone, who worked with us - therefore, our regular consumers get the most helpful purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Guinea, Ukraine, Portugal, Argentina, Peru, Uzbekistan, Libya, Seychelles, Antigua and Barbuda, Indonesia, Belarus, Malawi, Turkmenistan, Australia, The Gambia, Jordan, Turkey, Saudi Arabia, Uruguay, Tanzania, Algeria, Burundi, Uganda, Croatia, Liechtenstein, Lithuania, Nigeria, Nepal, Cameroon, Laos, Latvia, Kyrgyzstan, Eswatini, Cyprus, Niger, Bolivia, Armenia, Ghana, Mali, Benin, Senegal, Serbia. A well-elaborated logistics chains and a partnership network cheer us to deliver our goods anywhere in the earth as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |