We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637938
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480637938, connect FAMAGA, the world's top supplier of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of products and private attention to each orderer. We understand everyone, who collaborated with us - so, our regular consumers get the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Latvia, Mauritius, Australia, Albania, Eritrea, Belgium, Singapore, South Sudan, Guatemala, Guyana, Honduras, Cape Verde, Finland, Georgia, Brazil, Ireland, Estonia, Tonga, Comoros, United States, Vietnam, Hungary, Samoa, Sweden, Swaziland, Panama, Malaysia, Mauritania, Morocco, Croatia, Jordan, Seychelles, Kyrgyzstan, Zimbabwe, Kazakhstan, Yemen, Eswatini, Syria, Sudan, Togo, Iran. A well-shaped logistics bond and a partnership network allow us to ship our goods anywhere in the earth with no delay without disreputing product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Please note that this variant does not use a scraper. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |