We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408209
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472408209, catch up with FAMAGA, the world's major distributor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of outputs and private attention to each customer. We understand everyone, who cooperated with us - thus, our regular customers receive the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such customers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Austria, Nepal, Czech Republic, Sri Lanka, Monaco, Oman, Liberia, Georgia, Saudi Arabia, Iraq, Slovakia, Slovenia, Romania, Kuwait, Cameroon, Turkmenistan, Israel, Mauritania, Syria, Guatemala, Bulgaria, United States, Suriname, The Gambia, South Sudan, Moldova, Botswana, Costa Rica, Dominica, Togo, Malaysia, Argentina, Switzerland, Samoa, Russia, Ecuador, Peru, Malta, United Arab Emirates, Poland, Serbia, Zambia, Latvia, Armenia. A well-elaborated logistics system and a partnership network let us to deliver our items anywhere in the earth quickly without compromising product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |