Aventics (brand of Emerson) R422001607
  Aventics (brand of Emerson) R422001607

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R422001607 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R422001607

Description

Piston rod modification through
Functional principle Single-acting, retracted without pressure
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 50 mm
Piston rod thread M10
Standardization ISO 21287
Stroke 10 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R422001607

If you are questing Aventics (brand of Emerson) R422001607, communicate with FAMAGA, the world's key distributor of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We value everyone, who liased with us - thus, our regular purchasers bring in the most favorable purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe . A well-developed logistics link and a partnership network let us to ship our units anywhere in the world with no delay without compromising product quality.

A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of factory-made equipment.

All outputs from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.

To get some advice or make a request, contact us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features R422001607

Standards ISO 21287
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Seal Polyurethane
Scraper Polyurethane