We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334458
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822334458, contact FAMAGA, the world's principle retailer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of spare parts and private attention to each consumer. We esteem everyone, who liased with us - therefore, our regular consumers accept the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Bahrain, Angola, North Korea, Peru, Kiribati, Madagascar, Ghana, Dominica, Croatia, United States, Benin, Comoros, Serbia, Bangladesh, Canada, Senegal, Georgia, Eritrea, Armenia, Estonia, Chad, Mauritania, Rwanda, Samoa, Cyprus, Slovakia, Finland, Sweden, Kuwait, Vietnam, Austria, Mozambique, Belize, Costa Rica, Russia, Tanzania, Nepal, Iran, Sudan, El Salvador, Mali, United Arab Emirates, Bolivia, Belarus, Panama. A well-built logistics bond and a partnership network assist us to ship our units anywhere in the earth with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |