We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001408
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001408, get in touch with FAMAGA, the world's key company of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and individual attention to each consumer. We admire everyone, who cooperated with us - therefore, our regular customers receive the most flexible purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Belgium, Eswatini, Congo, Djibouti, Niger, Pakistan, Central African Republic, Sweden, France, Macedonia, Czech Republic, Kyrgyzstan, Iran, Brazil, Guinea, Turkmenistan, East Timor, Norway, Belize, Benin, Argentina, Angola, Kazakhstan, Brunei, Hungary, Armenia, Afghanistan, Chile, Monaco, Algeria, Mongolia, Morocco, Turkey, Cyprus, Jordan, Andorra, Serbia, Iraq, Haiti, Tunisia, Denmark, South Korea, Iceland, Zambia, Ghana, Nigeria. A well-built logistics system and a partnership network guide us to deliver our items anywhere in the globe on-time without compromising product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |