We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020662
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020662, make contact with FAMAGA, the world's leading supplier of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each purchaser. We respect everyone, who cooperated with us - thus, our regular consumers obtain the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Peru, Netherlands, Namibia, Latvia, Kyrgyzstan, Bahamas, Japan, Cuba, Botswana, Nepal, Kuwait, Tajikistan, Afghanistan, South Sudan, Eritrea, Finland, United Arab Emirates, Libya, Comoros, Norway, Dominica, Equatorial Guinea, Brunei, Ireland, Central African Republic, Indonesia, Cameroon, Angola, Mauritania, Guyana, Haiti, Iceland, Switzerland, Luxembourg, Slovakia, Malaysia, Togo, Serbia, Turkey, Egypt, Burkina Faso, Syria, Guatemala. A well-shaped logistics connection and a partnership network guide us to send our goods anywhere in the globe immediately without undermining product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or book, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |