We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822384011
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822384011, communicate with FAMAGA, the world's central vendor of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each client. We respect everyone, who cooperated with us - so, our regular consumers get the most desirable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Moldova, Ecuador, Burkina Faso, Australia, Indonesia, Papua New Guinea, Grenada, Bhutan, Hungary, Equatorial Guinea, Sudan, Palestine, Romania, Iran, Malta, Azerbaijan, Niger, Armenia, Yemen, Turkey, Luxembourg, Bosnia and Herzegovina, Liberia, Central African Republic, Kyrgyzstan, Tajikistan, Uruguay, Vietnam, Andorra, Paraguay, Belize, Benin, Iceland, Namibia, Comoros, Ukraine, Laos, Argentina, Syria, Libya, Kazakhstan, Antigua and Barbuda, Czech Republic. A advanced logistics system and a partnership network help us to dispatch our goods anywhere in the globe immediately without discrediting product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |