Aventics (brand of Emerson) 0822084211
  Aventics (brand of Emerson) 0822084211

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822084211 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822084211

Description

Piston rod modification through
Functional principle double-acting
Cushioning elastic
Piston diameter 25 mm
Piston rod thread M10x1,25
Standardization ISO 6432
Stroke 400 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822084211

If you are pursuing Aventics (brand of Emerson) 0822084211, reach FAMAGA, the world's main distributor of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each purchaser. We understand everyone, who engaged with us - thus, our regular purchasers accept the most flexible purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such clients, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth . A well-shaped logistics network and a partnership network let us to ship our units anywhere in the globe with no delay without disreputing product quality.

A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of machine made streamlined equipment.

All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.

To inquire or make a request, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822084211

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another!
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane