We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R412019860 (SSI-DA-050-0080-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI
Part number
R412019860
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412019860 (SSI-DA-050-0080-4-02-2-000-000) AVENTICS - Kurzhubzylinder, Serie SSI R412019860, get in touch with FAMAGA, the world's prime retailer of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each consumer. We understand everyone, who liased with us - so, our regular clients accept the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Sudan, Sri Lanka, Bangladesh, Spain, Netherlands, Guinea, Guatemala, Nigeria, Honduras, Finland, Croatia, Austria, Morocco, Japan, El Salvador, Eswatini, Zimbabwe, Philippines, Turkmenistan, Ireland, Cyprus, Samoa, Panama, Hungary, Dominica, Cape Verde, China, Iran, Yemen, Denmark, Georgia, Pakistan, Greece, Angola, The Gambia, Botswana, Vietnam, Estonia, Senegal, Egypt, South Korea, Mauritius, Belarus. A well-developed logistics bond and a partnership network guide us to send our elements anywhere in the globe quickly without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or order, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |