We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637962
Description
| Piston rod modification | non-rotating, with front plate |
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Standardization | ISO 15524 |
| Stroke | 40 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) R480637962, contact FAMAGA, the world's the best distributor of factory-made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of spare parts and special attention to each purchaser. We appreciate everyone, who collaborated with us - hence, our regular buyers bring in the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Liechtenstein, Guinea, The Bahamas, Eswatini, Croatia, France, Australia, Seychelles, Ghana, Greece, Tajikistan, Liberia, Tanzania, Nigeria, Burundi, Ireland, Philippines, Lithuania, Togo, Iran, Argentina, Montenegro, Moldova, Dominica, Malaysia, Kyrgyzstan, Rwanda, Jordan, Belize, United States, Laos, Bulgaria, Indonesia, Iceland, Mongolia, Senegal, Niger, Czech Republic, Cameroon, New Zealand, Bangladesh, Kiribati, Central African Republic. A well-built logistics network and a partnership network guide us to dispatch our items anywhere in the world immediately without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Front plate | Aluminum |
| Guide rod | Stainless steel |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
