We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395004
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822395004, get in touch with FAMAGA, the world's dominant company of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of spare parts and individual attention to each orderer. We value everyone, who engaged with us - therefore, our regular consumers get the most acceptable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, North Korea, Liechtenstein, Iceland, Djibouti, Saudi Arabia, Sierra Leone, Kuwait, Central African Republic, Israel, Liberia, Antigua and Barbuda, Guinea, Mongolia, Moldova, Eswatini, Comoros, Togo, Hungary, Samoa, Iraq, Chad, Czech Republic, Uganda, Libya, Gambia, China, Turkey, Senegal, Tanzania, Denmark, Seychelles, Slovakia, Bangladesh, Syria, Brazil, Niger, Sudan, Austria, Thailand, Ukraine, Bosnia and Herzegovina, Philippines, Mali, Jamaica. A well-elaborated logistics link and a partnership network let us to conduct our products anywhere in the planet as soon as possible without discrediting product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |