We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001325
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 40 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001325, call FAMAGA, the world's influential distributor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each orderer. We praise everyone, who conspired with us - so, our regular buyers procure the most favorable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such consumers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cyprus, Russia, Albania, Armenia, Monaco, Cuba, New Zealand, East Timor, Mozambique, Guyana, Philippines, Finland, Egypt, Switzerland, Kazakhstan, India, Poland, Namibia, Romania, The Bahamas, Mexico, Mauritius, Afghanistan, Nicaragua, Nigeria, Nepal, Kuwait, Bolivia, Vietnam, Austria, Burkina Faso, Costa Rica, Equatorial Guinea, Mauritania, Belarus, Haiti, Madagascar, Morocco, China, Georgia, Tonga, United States, North Korea. A well-built logistics network and a partnership network let us to dispatch our products anywhere in the globe promptly without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this quantity is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |