We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334456
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822334456, contact FAMAGA, the world's main producer of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and personalseparate attention to each user. We cherish everyone, who worked with us - thus, our regular customers get the most convenient purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such buyers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Libya, Moldova, Central African Republic, Kuwait, Sri Lanka, Uzbekistan, Ecuador, Eswatini, Eritrea, Saudi Arabia, Malaysia, Malawi, Greece, Israel, Uganda, Canada, Ghana, Azerbaijan, Swaziland, Gambia, Costa Rica, Lithuania, Djibouti, Jordan, Nepal, Tanzania, Montenegro, Kazakhstan, Malta, Albania, Denmark, Zambia, Belize, Angola, Mali, Vietnam, Nigeria, Turkey, Chile, Mozambique, Iraq, Poland. A well-developed logistics series and a partnership network assist us to send our units anywhere in the planet with no delay without undermining product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, contact us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |