We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822494303
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822494303, communicate with FAMAGA, the world's top producer of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each buyer. We appreciate everyone, who cooperated with us - therefore, our regular customers receive the most convenient purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Latvia, Mauritania, Mauritius, Uruguay, France, South Sudan, The Gambia, Bolivia, Gambia, The Bahamas, Eswatini, Monaco, United States, Seychelles, Costa Rica, Malawi, Yemen, Angola, New Zealand, Fiji, Bosnia and Herzegovina, Benin, Nigeria, Philippines, Central African Republic, Togo, Swaziland, Brunei, Cyprus, Mali, Switzerland, Botswana, Cameroon, Ireland, Macedonia, Albania, Morocco, Poland, Austria, Georgia, Paraguay. A well-built logistics system and a partnership network allow us to deliver our items anywhere in the world immediately without discrediting product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |