We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5811610300
Description
Standardization | ISO 5599-1 |
Frame size | ISO 1 |
Return type | With air spring return |
Switching principle | 5/2 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Port size | Form B, industry |
Type | Plug |
Nominal flow Qn | 1400 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
Operational voltage AC at 60 Hz | 110 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5811610300, reach FAMAGA, the world's primary producer of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and personalseparate attention to each consumer. We value everyone, who conspired with us - therefore, our regular clients pick up the most attractive purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such clients, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Dominica, Madagascar, Bahamas, Sri Lanka, Chad, Cyprus, Italy, Switzerland, Samoa, Cuba, Cameroon, Philippines, Myanmar, Mongolia, Jamaica, Comoros, Nepal, Japan, Costa Rica, Vietnam, Singapore, Qatar, Russia, Seychelles, Brazil, Djibouti, Guyana, Monaco, Pakistan, Haiti, Mauritius, Luxembourg, Kyrgyzstan, Finland, Mozambique, Macedonia, Mexico, Mali, Belarus, Burundi, Swaziland, Uruguay, Bolivia, New Zealand. A well-built logistics chains and a partnership network assist us to deliver our goods anywhere in the planet with no delay without disreputing product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | 1,3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1400 l/min |
Flow conductance C | 5,2 l/(s*bar) |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 30 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 2 Nm |
Weight | 0,26 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |