We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822393906
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 40 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822393906, contact FAMAGA, the world's top producer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and special attention to each buyer. We esteem everyone, who collaborated with us - so, our regular consumers get the most flexible purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4500 such purchasers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Italy, Grenada, Dominican Republic, Bhutan, Cameroon, Burundi, Slovakia, Rwanda, Thailand, Tunisia, Benin, Argentina, Philippines, Indonesia, Namibia, Honduras, Turkmenistan, Malta, Israel, Tanzania, Niger, Laos, Eritrea, Dominica, Libya, The Bahamas, Armenia, Kiribati, Iran, Togo, Kenya, Ghana, Tajikistan, Turkey, Bosnia and Herzegovina, Seychelles, Jordan, Nepal, Equatorial Guinea, Finland, Eswatini, Kyrgyzstan, Macedonia. A well-shaped logistics chains and a partnership network assist us to dispatch our units anywhere in the globe as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |