We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1323208000
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Stroke | 80 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1323208000, connect FAMAGA, the world's foremost supplier of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are depicted in the quality of goods and particular attention to each orderer. We cherish everyone, who liased with us - therefore, our regular consumers receive the most desirable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 3500 such purchasers, and we constantly make new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Burma, Nicaragua, Guinea, Vietnam, Qatar, Slovenia, Comoros, Madagascar, East Timor, United Arab Emirates, Israel, South Korea, Norway, Uruguay, Burkina Faso, Liberia, Bhutan, Switzerland, Latvia, Estonia, Seychelles, Ireland, Japan, Azerbaijan, Bosnia and Herzegovina, Yemen, Jordan, Guyana, Pakistan, Finland, Mauritius, Laos, Serbia, Morocco, Syria, Cameroon, Senegal, Cyprus, Equatorial Guinea, Georgia, Niger, Cape Verde, Indonesia, Albania. A well-shaped logistics network and a partnership network assist us to send our units anywhere in the globe quickly without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this amount is amounting every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |