We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637961
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Standardization | ISO 15524 |
Stroke | 30 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480637961, call FAMAGA, the world's prime supplier of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of merchandises and individual attention to each orderer. We value everyone, who conspired with us - so, our regular clients get the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Papua New Guinea, Finland, Togo, Lithuania, Czech Republic, Bolivia, Oman, Belgium, Malaysia, Fiji, Brunei, Malawi, Netherlands, Kuwait, The Gambia, Eswatini, The Bahamas, Guatemala, Botswana, Canada, Turkmenistan, Dominica, Cyprus, Vietnam, Bosnia and Herzegovina, Qatar, South Korea, Cape Verde, Israel, Peru, Swaziland, Georgia, Kyrgyzstan, Mozambique, Cameroon, Jamaica, Burkina Faso, Ireland, Uganda, Mauritius, Belarus, Rwanda, El Salvador, Iran, Costa Rica, Greece, Switzerland, Estonia, Afghanistan, Serbia. A well-developed logistics bond and a partnership network let us to deliver our products anywhere in the globe quickly without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the sphere of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |