We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394207
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822394207, communicate with FAMAGA, the world's key distributor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each consumer. We understand everyone, who worked with us - hence, our regular purchasers obtain the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Swaziland, Seychelles, Thailand, Dominican Republic, Guinea-Bissau, Mozambique, Tonga, Papua New Guinea, Guatemala, Serbia, Kenya, Togo, Liberia, Pakistan, Hungary, Cape Verde, Syria, Singapore, Morocco, Panama, Nigeria, The Gambia, Mauritania, South Korea, Egypt, Zimbabwe, Gambia, Afghanistan, Iraq, Brunei, Jordan, Nicaragua, Botswana, Bosnia and Herzegovina, The Bahamas, Argentina, Benin, Haiti, Dominica, Switzerland, Angola, Kiribati, Costa Rica, Sierra Leone, Finland, United Arab Emirates, Luxembourg, Iran, Poland, Latvia, Croatia, Indonesia. A well-developed logistics bond and a partnership network assist us to ship our units anywhere in the world with no delay without damaging product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or make a request, contact us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |