We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503598
Description
Number of valve positions | 8 |
Subbase | Aluminum |
Compressed air connection input | G 1/8 |
Compressed air connection output | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1825503598, connect FAMAGA, the world's primary supplier of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each purchaser. We esteem everyone, who cooperated with us - hence, our regular clients receive the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Morocco, Afghanistan, New Zealand, Papua New Guinea, Dominican Republic, Mexico, Eswatini, Honduras, Belarus, Finland, Kiribati, Cape Verde, United States, Kyrgyzstan, Serbia, Costa Rica, Dominica, Switzerland, Laos, Philippines, South Korea, Seychelles, Burkina Faso, Eritrea, Liechtenstein, Indonesia, Netherlands, Kuwait, Cameroon, Russia, Ireland, Nicaragua, Fiji, Niger, Guatemala, Turkmenistan, Mauritius, Djibouti, Jamaica, Nigeria, Tajikistan, El Salvador, Botswana, Bolivia, Albania, Uruguay, Comoros, Brunei, Cyprus, Swaziland. A well-developed logistics connection and a partnership network assist us to conduct our elements anywhere in the planet immediately without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is ascending every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To request or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Working pressure min./max. | 0 ... 10 bar |
Medium | Compressed air |
Grid dimension | 23 mm |
Direction of pneumatic port (2,4) | On the side |
Exhaust (3,5) | With directional exhaust (3/5) |
Mounting screw | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |