We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001226
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 21287 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001226, make contact with FAMAGA, the world's major retailer of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each consumer. We respect everyone, who liased with us - so, our regular customers bring in the most convenient purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Bahamas, Tajikistan, Slovenia, Angola, South Sudan, Zimbabwe, Moldova, Jamaica, Sweden, Latvia, Israel, Poland, Swaziland, Sudan, Comoros, Ecuador, Turkmenistan, Egypt, Austria, Finland, Syria, Costa Rica, Dominica, Cyprus, Macedonia, Japan, Fiji, Zambia, Cape Verde, Kuwait, Togo, Australia, Nepal, Ukraine, Burkina Faso, Albania, Czech Republic, Djibouti, Estonia, Brunei, Mauritania, Afghanistan, Panama, Haiti, Cameroon, Benin, Tonga. A well-elaborated logistics bond and a partnership network guide us to deliver our elements anywhere in the globe on-time without disreputing product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or book, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |