Aventics (brand of Emerson) 5728455680
  Aventics (brand of Emerson) 5728455680

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

5728455680 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

5728455680

Description

Actuating control single solenoid
Return type With air spring return
Switching principle 4/2
Version Diaphragm poppet valve
Housing Polyoxymethylene
Sealing material Acrylonitrile butadiene rubber
Connector standard EN 175301-803, form C
Protection class IP65
Port size EN 175301-803, form C
Type Plug
Nominal flow Qn 200 l/min
Compressed air connection input Ø 6x1
Compressed air connection output Ø 6
Operational voltage AC at 50 Hz 230 V
Operational voltage AC at 60 Hz 230 V
Activation Electrically

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 5728455680

If you are looking for Aventics (brand of Emerson) 5728455680, connect FAMAGA, the world's foremost retailer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each buyer. We respect everyone, who liased with us - so, our regular clients get the most desirable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 3500 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the earth . A well-developed logistics chains and a partnership network let us to deliver our products anywhere in the world on-time without disreputing product quality.

A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.

All goods from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.

To ask a question or order, phone us or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 5728455680

Version Diaphragm poppet valve
Activation Electrically
Pilot Internal
Sealing principle Soft sealing
Working pressure min./max. 1,8 ... 10 bar
Note The maximum operating pressure depends on the ambient temperature. The following values are applicable:-15 °C ... 50 °C: Operating pressure 1.8 bar ... 8 bar possible.-15 °C ... 40 °C: Operating pressure 1.8 bar ... 10 bar possible.
Control pressure min./max. See table
Ambient temperature min./max. -15 ... 50 °C
Medium temperature min./max. -15 ... 50 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 1 mg/m³
Nominal flow Qn 200 l/min
Connector standard EN 175301-803, form C
Protection class with connection IP65
Reverse polarity protection Protected against polarity reversal
Duty cycle 100 %
Typ. switch-on time 12 ms
Typ. switch-off time 12 ms
Mounting on manifold strip PRS strip
Weight See table
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Versions with voltage of less than 50 V DC do not have a protective ground.
Material
Housing Polyoxymethylene
Seals Acrylonitrile butadiene rubber