We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503866
Description
Number of valve positions | 8 |
Subbase | Aluminum |
Compressed air connection input | M5 |
Compressed air connection output | Ø 4x1 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1825503866, get in touch with FAMAGA, the world's foremost provider of machine made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each orderer. We respect everyone, who collaborated with us - hence, our regular clients bring in the most desirable purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Dominican Republic, Peru, Honduras, Afghanistan, Canada, Indonesia, Azerbaijan, United Arab Emirates, Jordan, Guyana, Fiji, Cape Verde, The Gambia, Libya, Rwanda, Nicaragua, Croatia, Romania, Iceland, Belize, Kenya, Nepal, Sudan, Mauritania, Mozambique, The Bahamas, Haiti, Mongolia, East Timor, Bangladesh, Eswatini, Russia, Togo, Mauritius, Zimbabwe, Finland, Tanzania, Serbia, Morocco, Seychelles, Bulgaria, Cyprus, Thailand. A well-developed logistics network and a partnership network allow us to dispatch our elements anywhere in the planet immediately without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as stay in control.
To consult or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Working pressure min./max. | 0 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Grid dimension | 18 mm |
Direction of pneumatic port (2,4) | On the side |
Exhaust (3,5) | With directional exhaust (3/5) |
Mounting screw | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Surface | anodized |
Base plate | Aluminum |
push-in fitting | Brass |