Aventics (brand of Emerson) R422103010
  Aventics (brand of Emerson) R422103010

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R422103010 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R422103010

Description

Actuating control double solenoid
Switching principle 2x3/2
Version Spool valve, positive overlapping
Housing Polyamide fiber-glass reinforced
Sealing material Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber
Protection class IP65
Qn 1▶2 650 l/min
Qn 2▶3 520 l/min
Nominal flow Qn 650 l/min
DC operating voltage 24 V
Activation Electrically

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R422103010

If you are looking for Aventics (brand of Emerson) R422103010, communicate with FAMAGA, the world's main provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each purchaser. We cherish everyone, who worked with us - therefore, our regular clients obtain the most desirable purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet . A well-elaborated logistics bond and a partnership network allow us to conduct our goods anywhere in the globe immediately without damaging product quality.

A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of manufacturing equipment.

All items from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.

To request or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R422103010

Version Spool valve, positive overlapping
Activation Electrically
Pilot External
Sealing principle Soft sealing
Blocking principle Base plate principle, multiple
Working pressure min./max. -0,9 ... 10 bar
Control pressure min./max. 3 ... 8 bar
Ambient temperature min./max. -10 ... 60 °C
Medium temperature min./max. -10 ... 60 °C
Medium Compressed air
Max. particle size 40 µm
Oil content of compressed air 0 ... 5 mg/m³
Nominal flow Qn See table
Nominal flow 1 ▶ 2 See table
Nominal flow 2 ▶ 3 520 l/min
Pilot control exhaust With collective pilot air exhaust
Protection class with connection IP65
LED status display Yellow
Duty cycle 100 %
Typ. switch-on time 16 ms
Typ. switch-off time 25 ms
mounting screws Hexalobular socket (TORX) ISO 10664-8
Mounting screw tightening torque 0,5 Nm
Tightening torque tolerance ±0,1 mT
Weight See table
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Housing Polyamide fiber-glass reinforced
Seals Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber
End plate Polyamide fiber-glass reinforced