We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001305
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001305, communicate with FAMAGA, the world's principle distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each orderer. We admire everyone, who liased with us - therefore, our regular clients bring in the most flexible purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Azerbaijan, Paraguay, Sierra Leone, Grenada, Cameroon, Congo, Djibouti, Moldova, Luxembourg, Bhutan, Kenya, Macedonia, Gambia, Rwanda, Iceland, Costa Rica, Chad, Syria, Ukraine, Lithuania, Seychelles, Cape Verde, Egypt, Turkmenistan, Antigua and Barbuda, New Zealand, South Sudan, Sudan, Norway, Comoros, Croatia, United States, India, Chile, Tanzania, Togo, Kazakhstan, Ireland, Libya, Qatar, Equatorial Guinea, Tunisia, Namibia, Tonga. A well-elaborated logistics link and a partnership network allow us to conduct our goods anywhere in the globe quickly without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |