We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001636
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001636, contact FAMAGA, the world's chief provider of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each buyer. We esteem everyone, who collaborated with us - hence, our regular purchasers accept the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Central African Republic, United Arab Emirates, Moldova, Botswana, Montenegro, Portugal, Sierra Leone, Grenada, Ghana, Singapore, Saudi Arabia, Iran, Switzerland, Azerbaijan, Turkey, Bhutan, Belize, Mongolia, Ukraine, New Zealand, Algeria, Dominica, Austria, South Sudan, Mali, Gambia, Turkmenistan, Guatemala, Niger, Fiji, Nigeria, Andorra, Samoa, Tunisia, Tonga, Israel, Chile, Antigua and Barbuda, Uruguay, Iraq, Zambia, Jamaica. A advanced logistics chains and a partnership network assist us to dispatch our products anywhere in the world promptly without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |