We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334410
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822334410, catch up with FAMAGA, the world's leading supplier of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each client. We appreciate everyone, who engaged with us - hence, our regular consumers bring in the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Syria, Norway, Guatemala, Argentina, Brunei, Cuba, Lesotho, Eritrea, Indonesia, Malawi, Japan, Morocco, Ukraine, Russia, Kuwait, Romania, Angola, Albania, Djibouti, Sweden, Zimbabwe, Bangladesh, Latvia, Belize, Benin, Guyana, Fiji, Slovakia, Mauritania, Ecuador, Serbia, Panama, Mali, Philippines, Cyprus, Poland, Burkina Faso, Jamaica, Dominica, Tajikistan, Samoa, Malta. A advanced logistics network and a partnership network assist us to dispatch our units anywhere in the world with no delay without undermining product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To request or order, call us by phone or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |