We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822393010
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822393010, reach FAMAGA, the world's principle retailer of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and particular attention to each customer. We esteem everyone, who liased with us - therefore, our regular purchasers accept the most beneficial purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Lesotho, Liechtenstein, Uzbekistan, Switzerland, Ireland, Malta, Kazakhstan, Macedonia, Afghanistan, Montenegro, Albania, Bhutan, New Zealand, Zambia, Panama, Austria, South Sudan, Antigua and Barbuda, Central African Republic, Jordan, Guyana, Slovakia, Comoros, Rwanda, Lithuania, Suriname, United Arab Emirates, Tanzania, Iran, Armenia, Morocco, Turkey, Qatar, Azerbaijan, Ukraine, Equatorial Guinea, Bosnia and Herzegovina, Mali, Togo, Greece, Sudan, Bulgaria, Sweden, India, Costa Rica. A well-built logistics series and a partnership network help us to ship our elements anywhere in the planet promptly without disreputing product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that users choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |